;
;======================================================
; GSD-file for PROFIBUS-DP Coupler/SPC3
; Manufacturer: Beckhoff Automation GmbH
;               Eiserstr. 5
;               33415 Verl (Germany)
;               Tel.: +49(0)5246/963-0
; stock-nr.:  IP15xx-B310
; state:      02.06.06
;
;
;----------------------- TwinCAT ----------------------
;
Tc_KBus_supp = 1                                ; Bus-Coupler
Tc_Plc_supp = 0                                 ; Bus-Controller
Tc_Fbb_supp = 1                                 ; Fieldbus Box
Tc_Firmware_Flashable = 1                       ; 
Tc_Valid_Term(0) = 1677723102                   ; 0x64000000 + 1502
Tc_Comment = "Counter Compact Box"
Tc_BitmapFile = "Ip.bmp"
Tc_VendorBitmapFile = "Beckhoff.bmp"
;
;------------------------- DP -------------------------
;
#Profibus_DP
;
;------------------ PrmText-Definitionen --------------
;
PrmText = 1
Text(0) = "is not active"
Text(1) = "is active"
EndPrmText

PrmText = 11
Text(0) = "INTEL"
Text(1) = "MOTOROLA"
EndPrmText
		  
PrmText = 12
Text(0) = "Synchron"
Text(1) = "FreeRun"
EndPrmText

PrmText = 13
Text(0) = "IP-Cycle stopped"
Text(1) = "IP-outputs to 0"
Text(2) = "IP-outputs remain equal"
EndPrmText

PrmText = 45
Text(0) = "positives signal"
Text(1) = "positives edge"
EndPrmText

PrmText = 46
Text(0) = "Gate 0"
Text(1) = "Gate 1"
EndPrmText

PrmText = 47
Text(0) = "1 us/Digit 250 us - 65 ms"
Text(1) = "64 us/Digit 10 ms - 4 ms"
EndPrmText

PrmText = 48
Text(0) = "is active"
Text(1) = "is not active"
EndPrmText

;
;------------- ExtUserPrmData-Definitionen --------------
;
ExtUserPrmData = 1 "DPV1-Services (Class 1)"
Bit(7) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 7 "IP-Modul diagnosis"
Bit(1) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 11 "Data-Format"
Bit(3) 1 0-1
Prm_Text_Ref = 11
EndExtUserPrmData

ExtUserPrmData = 12 "Updating of process image"
Bit(6) 1 0-1
Prm_Text_Ref = 12
EndExtUserPrmData

ExtUserPrmData = 13 "Reaction on DP-Error"
BitArea(0-1) 0 0-2
Prm_Text_Ref = 13
EndExtUserPrmData

ExtUserPrmData = 86 "Fast FreeRun-Mode"
Bit(4) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

; UserPrmData IP15xx

ExtUserPrmData = 218 "channel 1 Einschalt Schwellwert"
Unsigned32 0 0-65535
EndExtUserPrmData

ExtUserPrmData = 219 "channel 1 Ausschalt/Impuls"
Unsigned32 0 0-65535
EndExtUserPrmData

ExtUserPrmData = 220 "channel 1 Reset Schwellwert"
Unsigned32 0 0-65535
EndExtUserPrmData

ExtUserPrmData = 200 "channel 1 Watchdog" 
Bit(0) 0 0-1
Prm_Text_Ref = 48
EndExtUserPrmData

ExtUserPrmData = 201 "channel 1 Set Counter"
Bit(1) 0 0-1
Prm_Text_Ref = 45
EndExtUserPrmData

ExtUserPrmData = 202 "channel 1 Set Output"
Bit(2) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 203 "channel 1 Reset Output"
Bit(3) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 204 "channel 1 Reset Counter"
Bit(4) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 205 "channel 1 Impuls Betrieb"
Bit(5) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 206 "channel 1 Disable Counter"
Bit(6) 1 0-1
Prm_Text_Ref = 46
EndExtUserPrmData

ExtUserPrmData = 207 "channel 1 Timer Base"
Bit(7) 0 0-1
Prm_Text_Ref = 47
EndExtUserPrmData

ExtUserPrmData = 210 "channel 1 Ruecksetzen mit Reset"
Bit(0) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 221 "channel 2 Einschalt Schwellwert"
Unsigned32 0 0-65535
EndExtUserPrmData

ExtUserPrmData = 222 "channel 2 Ausschalt/Impuls"
Unsigned32 0 0-65535
EndExtUserPrmData

ExtUserPrmData = 223 "channel 2 Reset Schwellwert"
Unsigned32 0 0-65535
EndExtUserPrmData

ExtUserPrmData = 208 "channel 2 Watchdog" 
Bit(0) 0 0-1
Prm_Text_Ref = 48
EndExtUserPrmData

ExtUserPrmData = 209 "channel 2 Set Counter"
Bit(1) 0 0-1
Prm_Text_Ref = 45
EndExtUserPrmData

ExtUserPrmData = 211 "channel 2 Set Output"
Bit(2) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 212 "channel 2 Reset Output"
Bit(3) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 213 "channel 2 Reset Counter"
Bit(4) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 214 "channel 2 Impuls Betrieb"
Bit(5) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

ExtUserPrmData = 215 "channel 2 Disable Counter"
Bit(6) 1 0-1
Prm_Text_Ref = 46
EndExtUserPrmData

ExtUserPrmData = 216 "channel 2 Timer Base"
Bit(7) 0 0-1
Prm_Text_Ref = 47
EndExtUserPrmData

ExtUserPrmData = 217 "channel 2 Ruecksetzen mit Reset"
Bit(0) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData

;
;---------------------- DP-General ---------------------
;
GSD_Revision = 3
Vendor_Name = "BECKHOFF"
Model_Name = "IP1502-B3xx"
Revision = "Revision 3.2"
Ident_Number = 0x0516
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release = "08"
Software_Release = "B3"

9.6_supp = 1
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 350
MaxTsdr_12M = 550
Redundancy = 0
Repeater_Ctrl_Sig = 0
24V_Pins = 0

Implementation_Type = "SPC3"
Bitmap_Device = "Ip"
;
;-------------------- DP-Slave -----------------------
;
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0
Min_Slave_Intervall = 1
Modular_Station = 0

Fail_Safe = 1
Max_Diag_Data_Len = 64
Modul_Offset = 0
Slave_Family = 3
;
;---------------------- DPV1 -------------------------
;
DPV1_Slave = 1
C1_Read_Write_supp = 1
C1_Max_Data_Len = 48
C1_Response_Timeout = 1000
C2_Read_Write_supp = 1
C2_Max_Data_Len = 48
C2_Response_Timeout = 1000
C2_Max_Count_Channels = 1
Max_Initiate_PDU_Length = 52
;
;------------------- UserPrmData ---------------------
;
Max_User_Prm_Data_Len = 57

Ext_User_Prm_Data_Const(0) = 0x00
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Const(1) = 0x00
Ext_User_Prm_Data_Const(2) = 0x08
Ext_User_Prm_Data_Const(3) = 0x00
Ext_User_Prm_Data_Const(4) = 0x00
Ext_User_Prm_Data_Const(5) = 0x00
Ext_User_Prm_Data_Const(6) = 0x00
Ext_User_Prm_Data_Const(7) = 0x40
Ext_User_Prm_Data_Ref(7) = 7
Ext_User_Prm_Data_Const(8) = 0x00
Ext_User_Prm_Data_Const(9) = 0x23
Ext_User_Prm_Data_Ref(9) = 11
Ext_User_Prm_Data_Ref(9) = 12
Ext_User_Prm_Data_Ref(9) = 86
Ext_User_Prm_Data_Const(10) = 0x00
Ext_User_Prm_Data_Ref(10) = 13
Ext_User_Prm_Data_Const(11) = 0x40
Ext_User_Prm_Data_Const(12) = 0x00
Ext_User_Prm_Data_Const(13) = 0x00,0x00
Ext_User_Prm_Data_Const(15) = 0x00,0x00,0x00,0x00,0x00
Ext_User_Prm_Data_Ref(20) = 200
Ext_User_Prm_Data_Ref(20) = 201
Ext_User_Prm_Data_Ref(20) = 202
Ext_User_Prm_Data_Ref(20) = 203
Ext_User_Prm_Data_Ref(20) = 204
Ext_User_Prm_Data_Ref(20) = 205
Ext_User_Prm_Data_Ref(20) = 206
Ext_User_Prm_Data_Ref(20) = 207
Ext_User_Prm_Data_Ref(21) = 210
Ext_User_Prm_Data_Ref(24) = 218
Ext_User_Prm_Data_Ref(28) = 219
Ext_User_Prm_Data_Ref(32) = 220
Ext_User_Prm_Data_Ref(22) = 208
Ext_User_Prm_Data_Ref(22) = 209
Ext_User_Prm_Data_Ref(22) = 211
Ext_User_Prm_Data_Ref(22) = 212
Ext_User_Prm_Data_Ref(22) = 213
Ext_User_Prm_Data_Ref(22) = 214
Ext_User_Prm_Data_Ref(22) = 215
Ext_User_Prm_Data_Ref(22) = 216
Ext_User_Prm_Data_Ref(23) = 217
Ext_User_Prm_Data_Ref(36) = 221
Ext_User_Prm_Data_Ref(40) = 222
Ext_User_Prm_Data_Ref(44) = 223
;
;-------------------- Modules ------------------------
;
Module = "IP15x2" 0xB4,0xB4
157
EndModule